TP-Link is one of the leading brands in networking devices. It does not need any introduction. It offers some amazing networking devices such as a wifi router, range extender, access point adapters, mesh system, and many more. However, are you looking for instructions on how you can reset TP Link extender to factory default settings? Well, there are several scenarios you need to reset your networking devices. This particular article will focus on how you can reset TP-Link extender to factory settings.
Before we dig into the process of resetting an extender. Let’s understand the possible reasons, why do we need to reset TP-Link extender?
Why Do We Need To Reset TP Link Extender?
There is no particular reason that why we need to reset TP Link extender to factory settings. One of the main reasons is when we are facing any issue with extender and we are not able to identify it. We can try several methods to fix the issue related to the TP-Link extender. However, some problems can not be identified. Because sometimes we can not come to conclusion about what is causing the actual problem.
If this is the case, then resetting the extender is the only way to solve the problem. Resetting the device will make your extender back to the default setting. This will also fix all the issues related to the extender.
Another reason you want to reset your TP-Link range extender if you have forgotten your administrator username and password of your TP-Link extender. In this case, you will not be able to login to the TP-Link extender and you will not be able to change any settings on your extender. Resetting the range extender will help you to set up your extender from the beginning so that you can do a fresh setup and create a new login username and password. Moreover, you can also set up the wifi setting and other connectivity settings too.
How to Reset TP-Link Extender step-by-step instructions?
How to reset tp link extender? If you are looking for the answer to this, then let me tell you Resetting the TP-Link extender is an easy job to do. One should not be facing any difficulty while doing this. Because TP-Link provides easy use of the design of the extender. The user can easily access the features of this device with the help of a button. Basically, there are three methods you can reset your TP link extender. We will discuss all three one by one.
This is the easiest method but only if your TP-Link extender has a visible reset button on it. If you have that reset button on your extender then follow the steps below to get the success:
- Plug your extender into the power outlet and wait for the solid light on power. Let it boot up completely.
- Locate the reset button on your device.
- Press and hold the reset button on your TP-Link extender and hold the button for about 4-5 seconds.
- You need to release the button once you see flashing lights on the extender.
Here you go! your extender is reset now to factory default settings. The lights will flash on your extender for few seconds and then you should get solid light on it. Now, you easily log in to the extender’s admin panel by using the default Username and Password which is the admin for both and make changes accordingly.
This method comes into use if your tp range extender does not have a visible reset button on it. Because some of the extenders do not come with a reset button. But they do have a factory reset button in a pinhole. In this case, you need to use a pen or paperclip to push the reset button which is in a pinhole.
You need to insert the paperclip in a factory reset hole and hold it for about 10-15 seconds. You need to keep an eye on the lights, once the lights will start flashing take out the paperclip. Let your extender boot up.
Once you see solid and steady light on it and your extender is rebooted. It means your extender is reset to factory settings.
This is the rarest method that users use. Because most of the users are not aware of it. This method we can use if we already have the admin credentials. Now, you might be thinking if we already have login credentials then why we need to reset this? Let me explain to you, sometimes the tp link extender seems to be configured but when we try to connect the device. It does not give internet, it shows No Internet.
If this the case, then we can log in to the admin panel of the extender by using the 192.168.0.254 default IP address. After login into the admin panel, click on System Tools and click on Reset.
Now, it will take some time to boot up. Do not unplug or press any button on your extender. Once you get solid light, it means your extender is reset.
How to setup TP-Link extender after resetting this to the factory settings?
After resetting the extender, the setup process is very simple. Before starting the setup, make sure you have Network Name (WiFi Name or SSID), Password, and Security Encryption Type. You can also configure it with the WPS method. The user just needs to push the WPS on the router and extender. Sometimes it does not work, so in this case, you can follow the setup wizard.
For the setup follow the steps below:
- Plug your extender into the power and let it boot up.
- Connect an ethernet cable from the extender to the computer. If you don’t have an ethernet cable you can connect your device wirelessly with TP-Link_Extender.
- Open the browser and type http://tplinkrepeater.net or 192.168.0.254 in the browser and click on enter. It will take you to the create login password screen. As shown below, create your login password and click on Start.
- Now, select the quick setup option. It will start scanning the networks nearby.
- Select your wifi name that you would like to extend and enter the password as well.
- After clicking on Next, it will take some to apply the changes.
- Finally, click on Finish and your extender is configured.
I hope this article has answered your question about how to reset tp link extender? This guide applies to all the TP-Link extenders. There would be slight differences that can vary from models to models. But the steps would be the same for all of them.